Purite Integra HP

The Purite Integra HP is a compact high volume laboratory water purification and distribution unit, capable of providing a wide range of options. The unit provides a minimum flow rate of 400l/hour at water qualities between 30μs/cm and 18.2MΩ-cm.

Categories: ,
FacebookLinkedinWhatsappEmail

Purite Integra HP

For clinical analyser feed

Type I, II or III water / RO water / Deionised (DI) water / Ultrapure water (UPW) water

The Purite Integra HP incorporates reverse osmosis and ultra violet radiation technologies, with internal storage and distribution pump; carbon dioxide, membrane degassing and bacterial filtration are available as options.

The use of a low-energy recirculation pump reduces energy consumption, while an integrated colour touchscreen display provides full monitoring and control.

 

 

Features

Purite Integra HP | Features

  • Produces 120 or 190 l/hr (requires softened feed)
  • Option of Integral 50 litre or external 300 litre purified water storage tank
  • Optional carbon dioxide membrane degasser to enhance deioniser capacity
  • Range of polishing deioniser options to meet all purity requirements and standards
  • Full colour LCD touch screen display for ease of operation
  • Low energy recirculation pump to conserve energy during periods of low demand
  • Cat5 compliant break tank to comply with water regulations
  • Optional manual by-pass to provide continuity of service in an emergency.

Unit Specification

Purite Integra HP | Unit Specification

Unit specification HP IT HP GP*
Width (mm) 890 1110
Depth (mm) 500 604
Height (mm) 840 1842
Maximum Shipping Weight (kg)* 95 134
Maximum Working Weight (kg)* 140 467

*Complete with plinth and 300 litre tank

Installation requirements HP IT HP GP
Power Single Phase, 230V, +/- 10%, 50 Hz** Single Phase, 230V, +/- 10%, 50 Hz**
Feed Water Potable Softened
Maximum TDS (ppm) 1000 1000
Minimum inlet pressure – psi (bar) 30 (2.1) 30 (2.1)
Maximum inlet pressure – psi (bar) 90 (6.2) 90 (6.2)
Feedwater temperature 1-30oC 1-30oC
Flowrate 400l/hr (min) 400l/hr (min)
Free chlorine Must be dechlorinated Must be dechlorinated

**110v 60Hz available as an option

System / Treated Water Specification

Purite Integra HP | System / Treated Water Specification

System specification HP IT HP GP
Pure water storage 50 litre 300 litre
Display panel LCD – Colour touch screen LCD – Colour touch screen
Pre-treatment 5μm pre-filter 5μm pre-filter
Reverse osmosis Low energy membranes Low energy membranes
Deionisation Various cylinder options Various cylinder options
Micro filtration Optional 0.2μm Optional 0.2μm
UV lamp 254nm 254nm
Purified water make-up flowrate @ 10°C 120 or 190 l/hr 120 or 190 l/hr
Purified water distribution Up to 270 l/hr and a max of 3 bar Up to 270 l/hr and a max of 3 bar
Carbon dioxide degassing Optional Optional
Treated water specification HP IT HP GP
Conductivity < 30μs/cm to 18.2MΩ-cm* < 30μs/cm to 18.2MΩ-cm*
Bacteria < 1cfu/ml** < 1cfu/ml**
Organics – TOC (ppb) < 30ppb < 30ppb
Particles < 0.2μm** < 0.2μm**

*pH of stored water may decrease due to absorption of free carbon dioxide

Reviews

There are no reviews yet.

Be the first to review “Purite Integra HP”

Your email address will not be published. Required fields are marked *

Related products

Reviews

There are no reviews yet.

Be the first to review “Purite Integra HP”

Your email address will not be published. Required fields are marked *